Instructions for using the Porsche Piwis 3 Engineering Mode

Instructions for using the Porsche Piwis 3 Engineering Mode

porsche tester 3

1.You need to set the engineer mode (E mode), it is recommended that you disconnect the car connection of the diagnostic interface PT3G VCI;
How to use Porsche Piwis 3 engineering mode-1

2.System-Diagnostics configuration for other model lines;
How to use Porsche Piwis 3 engineering mode-2

Change mode E,SAVE.
How to use Porsche Piwis 3 engineering mode-3

3.System-Diagnostics configuration for 911,981,918.970,Cayenne from 2011,Macan,change mode E,Save;
How to use Porsche Piwis 3 engineering mode-4

4.Connect porsche car,use PT3G VCI;
How to use Porsche Piwis 3 engineering mode-5 How to use Porsche Piwis 3 engineering mode-6
5.Automatically identify the model, or select your model series, enter the diagnosis, you will find that the ecu name is in German, indicating that the engineer mode has been enabled, and you can now code and change the ecu information;
How to use Porsche Piwis 3 engineering mode-7 How to use Porsche Piwis 3 engineering mode-8 How to use Porsche Piwis 3 engineering mode-9 How to use Porsche Piwis 3 engineering mode-10 How to use Porsche Piwis 3 engineering mode-11

6.If you want to change the ecu information, you need to translate German, good luck.

Be the first to comment

Leave a Reply

Your email address will not be published.


*