wiTech Micropod2 Clone Failed to Register Mopar

The WiTech MicroPod 2 is a diagnostic and programming tool used for Chrysler, Dodge, Jeep, and Ram vehicles. It’s a handheld device that connects to the vehicle’s OBD-II port and interfaces with the WiTech diagnostic software.

1. What is WiTech MicroPod 2?
The WiTech MicroPod 2 is a diagnostic and programming tool specifically designed for FCA (Fiat Chrysler Automobiles) vehicles. It allows technicians to perform diagnostics, flash programming, and other service functions.
2. Who Uses WiTech MicroPod 2?
WiTech MicroPod 2 is used by authorized dealerships, certified service centers, and qualified technicians working on FCA vehicles. It’s a portable tool for convenient diagnostics and programming.
3. What Can WiTech MicroPod 2 Diagnose?
WiTech MicroPod 2 can diagnose various vehicle systems, including the engine, transmission, ABS, airbag, body control modules, and more. It also supports programming and configuration of control modules.
4. Can WiTech MicroPod 2 Program Modules?
Yes, WiTech MicroPod 2 is capable of programming and configuring control modules within FCA vehicles. This includes updating software, adapting to new components, and performing other programming tasks.
5. Is WiTech MicroPod 2 User-Friendly?
WiTech MicroPod 2 is designed to be user-friendly. Its handheld form factor makes it easy to use, and it’s suitable for technicians who may need to move around the vehicle during diagnostics.
6. Does WiTech MicroPod 2 Work Wirelessly?
WiTech MicroPod 2 typically requires a wired connection to the vehicle through a diagnostic cable. However, there may be configurations that allow wireless communication, depending on the specific hardware and software setup.
7. What Vehicles Does WiTech MicroPod 2 Support?
WiTech MicroPod 2 supports Chrysler, Dodge, Jeep, and Ram vehicles. The specific range of supported models may vary with different versions of the tool.
8. How is WiTech MicroPod 2 Connected to the Vehicle?
WiTech MicroPod 2 connects to the vehicle through a special diagnostic cable and interface that plugs into the vehicle’s OBD-II (On-Board Diagnostics) port.
9. Can Consumers Purchase WiTech MicroPod 2?
WiTech MicroPod 2 is typically not available for direct consumer purchase. It is specialized diagnostic equipment meant for professional use by authorized FCA technicians.
10. How Often Does WiTech MicroPod 2 Software Need Updating?
Software updates for WiTech MicroPod 2 may be released periodically to include support for new vehicle models, system improvements, and bug fixes. It’s advisable to check for updates regularly to ensure optimal performance.


ProblemwiTech Micropod2 Clone Failed to Register Mopar, is there any solution ?

Solution: Chrysler tech authority for subscriptions use to work fine with clone micro-pod2 for programming with witech1 17.04 . Now Chrysler has changed from the normal site to now mopartsp.com that wants any obd tool registered and warning wiTECH 2.0 requires Mopar’s 2017 secure microPod II (WSP-31560 or above). The device you attempted to register to your account does not meet this criteria.
Ever since witech/tech authority moved to MoparTSP, micropod clones don’t work for ECU programming. This is down to all clones sharing the same serial number meaning you cannot get around the device registration. The process to register and configure the software is difficult if you are not in USA.
There is a limited range of approved devices, any other legit J2534 devices might work, might not.
With cda6 offline its one option to do ecu programming. How to Use CDA 6.13 6.14 with wiTech Micropod 2?

Be the first to comment

Leave a Reply

Your email address will not be published.