Today I will share my experience pack software using Tech 2 rs232 and TIS. Some write that they cannot fully record your memory card through TIS. And so I decided to try it, because yesterday I wrote them through the laptop, looking ahead would only say that a laptop is much more faster event, rather than via GM Tech 2 scanner. Yes and before you write need to remove the old soft.
As in my laptop with no DB9 I used the adapter. Also found a Bulletin in which there is an adapter, which recommends itself BOSH. One photo from the series is not enough, I forgot to do, where the choice of what you want to write to the card, and what it is now.
So someone wrote that his GM Tech2 does not see the GM card. If you are sure that you map all right, then I would recommend you to try to ReWire the element on the main Board under the number U32 he is the same as U33.I apologize in advance for my English and I would be very grateful for any support in my direction.
Leave a Reply