Volvo 88890300 Vocom Interface Installation instructions

July 1, 2021 Eva Auto scanner tools 0

This is installation instructions for Volvo 88890300

1.Unzip the files PTT-v1.12.260
21.Volvo 88890300 Vocom Interface Installation instructions-1 21.Volvo 88890300 Vocom Interface Installation instructions-2
Open the folder after unzipping
21.Volvo 88890300 Vocom Interface Installation instructions-3

Select setup to start the installation.
21.Volvo 88890300 Vocom Interface Installation instructions-4

When the installation is complete, select NO.

2.Unzip the files of VTT1.12-KG
21.Volvo 88890300 Vocom Interface Installation instructions-5 21.Volvo 88890300 Vocom Interface Installation instructions-6
Open the vtt1.12-kg folder and run the software.
21.Volvo 88890300 Vocom Interface Installation instructions-7

Click as 1, 2, 3, 4

3.Open the software as administrator
21.Volvo 88890300 Vocom Interface Installation instructions-8
21.Volvo 88890300 Vocom Interface Installation instructions-9

Input ID M311331
21.Volvo 88890300 Vocom Interface Installation instructions-10

Click on the picture to select and click OK
21.Volvo 88890300 Vocom Interface Installation instructions-11

Pop up the picture above and select OK to open the software.

Related posts:

  1. New Volvo 88890300 Vocom Interface PTT 2.03 Diagnose for Volvo/Renault/UD/Mack Truck
  2. volvo truck scanner 88890300 Vocom Interface with software installed on laptop ready to use
  3. Installation Steps and using Tips about K-tag V2.11
  4. How to Install Volvo VIDA 2014D Software on Win 7

Be the first to comment

Leave a Reply

Your email address will not be published.


*