0

LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide

This post will help you better understand how to operate the VSP-600 video scope on the LAUNCH X431 PAD 7.
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-1

The X431 PAD VII (PAD 7) has a USB cable, can directly connect to USB A port
The Launch VSP-600 Videoscope has 800mm length, 5.5 mm diameter, and 6 LEDs illumination. It also has a single button and supports remote control. Besides, It also supports 30 frames per second.

After connecting X431 PAD VII and VSP-600 properly, go to operate on the X431 tablet

Operation path:
Select Other Modules>> Toolbox>> Videoscope
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-2

Allow endoscopy to access super eyes
There are 90 deg view, magnet & hook attachments in the VSP600 package.
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-3
Magnet attachment and VSP-600 connection diagram:
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-4

90 deg view attachment and VSP-600 connection diagram:
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-5

Hook attachment and VSP-600 connection diagram:
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-6

Camera picture displayed
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-7

Camera mode
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-8

Video camera displayed
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-9
Video mode
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-10

Press the button to do remote
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-11

Start or stop recording
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-12

Path to check the image or video:
Select Other Modules>> Toolbox>> Videoscope>> Gallery
LAUNCH X431 PAD VII Work with VSP600 VideoScope Guide-13
More info for X431 PAD VII PAD 7 Full System Diagnostic Tool:https://www.autonumen.com/goods-7175-Launch-X431-PAD-VII-Pad-7-Full-System-Diagnostic-Tool.html

Leave a Reply

Your email address will not be published. Required fields are marked *