In this post, you could find a simple tool to repair car body dent paintless – WOYO PDR007 repair tool. It will be a good tool to save time and money for workshops.
First, post a video to know about WOYO PDR007:
WOYO PDR007 Repair Tool Description:
1.Simple, easy to use, low cost of learning
2.Compared with the traditional way of demolition and repair, speed 6 times faster delivery of owners, improve shop utilization, rapid recovery of investment
3.Two operating modes to adapt to different needs:
①. Time mode
②. Power mode
4.High-precision control, quality assurance, operational safety
5.Large-screen display, precise control, real-time monitoring
6. Voltage: 220~240V
Max Voltage: 250V
Max Power ≈ 800W
1.While in use, don’t press hard to avoid worsening the dent.
2.Don’t start operation from the center of dent
3.Don’t opera in a slide way
4.Don’t work on a same dent too long
5.While in use, don’t touch the dent to avoid burns
6.Make sure there is no air gap between repair head and auto body during operation
Note before Operation:
1.Do not use this device in patients with pacemakers and various metal prostheses.
2.Before using the equipment, please wear a protective mask, protective gloves and overalls to prevent burns in operation.
3.Do not wear any metal items such as watches, necklaces, keys, belt buckles, coins, zippers, etc..
4.The equipment shall not be used in conductive dust, spray working area, chemical fuel working area, high temperature zone and high humidity area.
5.When the device is powered on, no combustible material can be placed next to it.
6.Before using the equipment, please have a fire extinguisher in case of improper operation.
7.Do not have to install airbags in the vicinity of the use of this tool.
8.If the device is connected to the power supply, it is necessary to guard the equipment. Unplug the AC power outlet when not in use.
9.Equipment storage, the temperature should be maintained at 0~50 ℃, when the mobile device to avoid vibration.
Note in Operation:
1.Repair the head in the repair of damaged body process, repair the head and body temperature will rise rapidly, in the equipment, body, repair head without cooling, please do not touch, so as not to burn.
2. Repair head in the repair process, repair of head and body temperature will rise rapidly, single damaged parts do not for a long time operation (every 1~15 seconds after the operation with a wet towel repeatedly wipe the damaged parts of the cooling), high temperature paint to avoid hurting.
3.Repair process, repair the head and body temperature will rise rapidly, the car experience a moment of weak softening, during the repair of the head do not have to press the action, so as not to soften the moment caused by the increase in depression.