How to use our laptop for offline boot coding

We show you how to code with ODIS on our laptop and how it solved an unusual problem on a Seat Ibiza where a previous garage had had the door control module replaced and it was doing weird things that the garage couldn’t understand why.

We’ve seen it me, it’s him saying a new door, control module, it’s been doing some weird stuff, and the garage can’t figure out why. So we’re going to fill in all these details on us. Yes, adopt canceled we will adopt the procedure and see what happened right then, as you can see, there is no error right.
How to use our laptop for offline boot coding-1 (2)
I, go into self-diagnostics, and I go and see the list of control units. Let’s go to the block diagram above now. That’s pretty handy, but if you want to write something that you can do, we can go where I want to go into the body control module for sorting.

See this question What I had to do was enter the code in the driver door control module because it was miscoded even though it was not throwing a fault code. So we will click that button and the test plan will be executed. We’ve done it. I’ve recoded it. So I know the code is correct now, that’s correct, but it’s coded for left-hand drive.

I’ll tell you quickly we’re going to put nine, but obviously I’m not going to put that code in because that’s a left turn, that’s it, so now the correct code we’re going to put in is three:zero:zero:zero, We’re going to take the zero-zero code, and yes, we’re done, and that’s the end of the problem.

Another thing you have to be careful with is if the window switch is reversed. So if you’re working on the driver side and the passenger side works, it’s not a coding issue. It’s actually the control module that needs to be refreshed, it needs to be updated, and that’s a whole new module from tps, and as you can see, there’s definitely loads and loads of options there. You can do them all here.

You can change everything, configure the coding adaptation as well because once coded, added or I had to adjust the driver’s door, so I did turn the ignition on and that’s what I did, it was done successfully then no more problems .
How to use our laptop for offline boot coding-2 (2)

Configuring encoding adaptation as well as compliments of odis is ok because you can see the gated autoencoding module before we do it. Now that’s a hand-coded one that we’ll show you in the broadcast as an example. So click on the radio has your clothes, word: 57, I’m going, go into protected functions, codes, radio functions and execute what is inserted there. This is important. The current code in the radio is this: This is a big long code.

So if we press don’t continue we’ll have a look at the target value here because that will tell you if it’s correct or not and your first two digits are organized with zero five. So that’s right! Your last two digits Mine is a five or six speaker. So that’s right again.
How to use our laptop for offline boot coding-3 (2)

The next one is their six 0’s I’ll be from tahrir and other speakers and so on. So it’s coded correctly I’m not going to change it because there’s no need, that’s how you do your manual coding and how to code it correctly, where is the help of odis. Thank u.

Okay, as you can see earlier, we did the automatic coding of the door control module and now this is the manual and the coding that we’re going to show you takes the radio as an example. So click radio has your skirt, word: 57 gotta, go to protected function, code, radio function and do the inserted read what’s there. quite important right.

The current code on the radio is this: it’s a big long code. So if we press don’t continue we’ll have a look at the target value here because that will tell you if it’s correct or not so your first two digits my knees with zero five tissue. So that’s right! Your last two digits Mine is a five or six speaker. So that’s right again.
How to use our laptop for offline boot coding-4 (2)

Next up are their six 0s from the odd speaker of the liberation group blah blah blah. So it’s coded correctly I’m not going to change it because there is no need, that’s how you do your manual coding and how to code it correctly with the help of odis.

Thank you .

Be the first to comment

Leave a Reply

Your email address will not be published.


*