Autel Maxisys Elite Special Functions

The Autel Maxisys Elite functions perform various component adaptations, allowing you to recalibrate or configure certain components after making repairs or replacement.
The main section of the Adaptation Operation screen displays a list of operational and vehicle status information, which mainly consists of four parts:
1.  The first part in the top line shows the description of the operation being performed, and the execution status is displayed on the right, such as Completed, or Activated, etc.
2.  The second part shows the preconditions or requirements for executing the operation being selected.
3.  The third part displays the current conditions of the vehicle control module being learned for comparison to the preconditions suggested by the second part. If the current condition of the control module is out of the suggested limit value, you must adjust the vehicle condition to meet the requirement.
4.  The last part displays the instruction of how to use the functional button at the lower right corner of the screen to manipulate the teach-in operations.
6.1
Read the information carefully and check the vehicle condition accordingly, when you are sure that the Autel Scanner is ready to perform the adaptation, simply follow the instruction provided to make appropriate selections. When the operation is done, an execution status message such as Completed, Finished or Successful, displays.
Tap the ESC button to exit the function.

Be the first to comment

Leave a Reply

Your email address will not be published.


*